Table of Contents
Advertisement
Lines can be electrically drawn on the screen to depict important locations such as fishing spots
and danger areas.
Lines are available in four line types and seven colors (red, yellow, blue, cyan, green, white, and
purple). The default line type is the solid line.
1) Solid line
2) Dashed line --------- 3) Dotted line
As with marks, you may enter comments (12 alphanumeric characters) for lines.
4.1 Entering Lines
Lines can be entered seven ways: by latitude and longitude, range and bearing from own ship,
Loran C LOPs, Decca LOPs, line connection with own ship position, by +cursor, and by Loran A
LOPs.
4.1.1 Entering lines by latitude and longitude position
1. Press [MENU], [3], [2] to display the Setting menu.
[↓]
2. Press
to select Set LN Entry Method.
3. Press [←] to select Lat./Long.
4. Press the [LINE START] key.
Start Point [Lat./Long.]
Lat.
33°08.121'N
Long.
138°46.433'E
LINE START key: Close
↑↓←→: Sel
Starting Point
Comment may be affixed at any point on a line.
ENT: Enter
Intermediate Point
Intermediate Point
4. LINES
4) Dash-dot line
End Point
Fish
[Comment]
4-1
Hide quick links:
Advertisement
Table of Contents
