Changing Arp Track Color - Furuno GP-280 Operator's Manual

12.12 Changing ARP Track Color

You may change the color of the ARP track as desired.
1. Press [MENU], [2], [8] to display the Change Color/Line Type.
Change Color/Line Type

Set Area +Cursor
Old Color R
New Color R Y G C P B W
Old Type
New Type
Track Main
ARP(00) [00-10, 00: All]

<CAUTION>
This MENU is only for setting of own ship track line.
Not applicable for track lines of GPS buoy nor ARP target.
↑↓←→ : Sel, Fix
MENU : Esc
↓
2. Press [ ] to select Track and press [
3. Enter ARP acquisition number.
↑
4. Press [ ] to select Old Color and press [
↓
5. Press [ ] to select New Color and press [
↑
6. Press [ ] to select Set Range and [
7. Press the [ENT] key.
8. If you selected Cursor at step 6, go to step 9. For other selections go to step 11.
9. Place the cursor on the starting point of the track to process and press the [ENT] key.
10. Place the cursor on ending point of the track to process and press the [ENT] key.
11. Press the [ENT] key.
12. Press the [MENU] key several times to close the menu.
12-14
All
Y G C P B W
Sub GPS Buoy
ENT: Execute
→
→
] to select Cursor or All.
Same
Same
] to select ARP.
← →
] or [ ] to select color desired.
← →
] or [ ] to select color desired
20 for GP/GD
380, GP/GD-680