Changing Track Color, Line Type - Furuno GP-280 Operator's Manual

2.6 Changing Track Color, Line Type

This section shows how to change past track color and track line type.
2.6.1 Changing color of main and sub tracks
Changing color of all sections of specified track
1. Press [MENU], [2], [8] to display the Change Color/Line Type menu.
Change Color/Line Type Change Color/Line Type
 
Set Area Set Area
Old Color Old Color
New Color New Color
Old Type Old Type
New Type New Type
Track Track
 
<CAUTION> <CAUTION>
This MENU is only for setting of own ship track line. This MENU is only for setting of own ship track line.
Not applicable for track lines of GPS buoy nor ARP target. Not applicable for track lines of GPS buoy nor ARP target.
↑↓←→ : Sel, Fix ↑↓←→ : Sel, Fix
MENU : Esc MENU : Esc
[→]
2. Press to select All.
3. Press [↓] to select Old Color, and then select color desired.
4. Press [↓] to select New Color, and then select color desired.
5. Press [↓] to select Track followed by track type and press the [ENT] key.
Are you sure to change?
ENT: Change
Other Keys: Escape
6. Press the [ENT] key again to confirm.
7. Press the [MENU] key several times to close the menu.
2-20
+Cursor +Cursor
All All
R R Y G C P B W Y G C P B W
R Y G C P B W R Y G C P B W
Main Main Sub Sub GPS Buoy GPS Buoy
ARP(00) [00-10, 00: All] ARP(00) [00-10, 00: All]*
(*10 for GP/GD-280; 20 for GP/GD-380/680)
ENT: Executre ENT: Execute
Same Same
Same Same