6.7 Ship's Speed Alarm
This alarm uses ship's speed data fed from the navigator to release the alarms when the ship's
speed is higher or lower the preset speed range.
Speed V
Upper
Lower
6.7.1 Setting the ship's speed alarm
1. Press [MENU], [5], [1] to display the Alarm menu.
2. Select Page 2.
3. Select In RNG or Out RNG from the Speed field as appropriate.
4. Press [↓], enter alarm range (0.1-999.9 knots) in four digits and press the [ENT] key.
5. Press the [MENU] key several times to close the menu.
6.7.2 Disabling the ship's speed alarm
When the ship's speed alarm sounds, press the [CLR] key to silence the audio alarm. To cancel
the alarm set Speed on page 2 of the Alarm menu to Off.
Time t
In RNG alarm
Speed V
Upper
Lower
Out RNG alarm
Time t
6-11