6. Press [↑] or [↓] to select vacant target point number.
7. Press the [ENT] key. The display below appears when latitude and longitude are selected at
step 3.
Setting Page
Lat./Long. _
_ ° _ _ . _ _ _ 'N _ _ _ ° _ _ . _ _ _ 'W
←→
: Sel
MENU : Esc
8. Enter position according to selection made at step 3.
9. Press the [ENT] key.
10. Press the [MENU] key several times to close the menu.
A red X marks the location on the screen.
8.2 Erasing a Target Point Mark
8.2.1 Erasing by +cursor
1. Place +cursor on target point to erase.
2. Press the [CLR] key.
8.2.2 Erasing through target point list
1. Press [MENU], [7], [2] to display the target point list.
2. Press [↑] or [↓] to select target point to erase.
3. Press the [CLR] key. You are asked if it is OK to erase the target point.
4. Press the [ENT] key.
5. Press the [MENU] twice to close the menu.
ENT: Execute
8-3