Settings And Adjustments; Starting The Setup Procedure; How To Use The Menu - Furuno GP-1871F Installation Manual

3.

SETTINGS AND ADJUSTMENTS

3.1

Starting the Setup Procedure

When the system is powered on the first time, the [Initial Setup] is displayed immedi-
ately after the startup tests are completed.
Once these settings are completed, this menu does not appear again. These settings
can also be changed from the [Settings] menu on the [Home] page (see section 3.2).
To set the [Initial Setup] menu, follow the procedure below.
1. Tap [Language] to show the available display languages, then tap the language
you want to use.
2. Tap [Units of Measure] to show the [Units] menu.
3. Tap the unit you want to set. The settings options window appears.
4. Tap the unit of measurement you want to use, then tap the [<] at the top-left of the
settings options window.
5. Tap the [<] at the top-left of the [Units] menu to go back to the [Initial Setup] menu.
6. Tap [Time Zone]. The time offset window appears.
7. Select the appropriate time offset, then tap the [<] at the top-left of the offset win-
dow to go back to the [Initial Setup] menu.
8. Tap [Engines]. The engine selection window appears.
9. Select the number of engines on the boat, then tap the [<] at the top-left of the se-
lection window to go back to the [Initial Setup] menu.
10. Tap [OK] to save and apply the settings. The system takes a few seconds to apply
the settings, then the [Plotter] page appears.
Note: The menu items [GPS Simulation] and [Fish Finder Simulation] are intended for
promotional purposes. Make sure both these menu items are set to [OFF].
18
3.2

How to Use the Menu

The [Settings] menu contains customizing options for this equipment. To access the
[Settings] menu, follow the procedure below.
1. Tap the [Home] icon to show the [Home] screen.
2. Tap [Settings]. The [Settings] menu appears.
3. Tap the menu you want to access. Drag the menu to show menu items which do
not appear on-screen.
Top layer of Menu items for the selected
the menu top layer menu appear here.
4. Tap the menu item you want to set; the available settings and options appear in
the right-side of the screen. Tap the [>] icon to show sub-menu items.
5. Depending on the menu item selected, do one of the following:
• [ON]/[OFF] toggle boxes: Select [ON] to activate the function or feature, select
[OFF] to deactivate the function or feature.
• Settings and options: Tap the desired setting or option. The current selection
is indicated by a filled circle to the left of the setting or option.
• Slide-bar or keyboard icon: Drag the slider (solid circle) on the slider-bar to
set a value. For the software keyboard (appears after you tap the keyboard
icon), tap the keyboard to input a value, then tap [OK].
Selected menu item
appears in the title bar
Keyboard icon
Tap
Cancel input and
close the keyboard.
Move the cursor left or right.
6. Tap the [ ] icon at the top-right corner of the menu to close the menu.
3. SETTINGS AND ADJUSTMENTS
Drag the menu to
show the menu items
which are not
displayed on-screen.
Tap
Menu options for sub-menu items
appear in an overlaid window.
Backspace
Deletes the
character to the
left of the cursor.
Confirm and
apply the value
or setting.
19