Automatically Setting Ssid; Manually Setting Ssid - AMX Modero ViewPoint MVP-5200i Operation/Reference Manual

Automatically Setting SSID

In the Protected Setup page:
1.
Select Wireless Settings.
2.
Press the Site Survey button at the bottom of the page.
3.
Select a WEP secured WAP from within the Site Survey page, and press the Connect button (FIG. 24). .
FIG. 24 Site Survey of available WAPs (Secured WAP shown selected)
4.
If the security is not handled automatically, the information must be entered manually from the Wireless
Security menu.

Manually Setting SSID

In the Protected Setup page:
1.
Select Wireless Settings.
2.
Locate the Wireless Security menu (FIG. 25).
FIG. 25 Wireless Security page
3.
Press the Static WEP button to open the Static WEP Settings dialog (FIG. 26).
4.
Press the SSID field. From the Network Name (SSID) keyboard, enter the SSID name used by the target
Wireless Access Point (case sensitive), and press Done when finished.



MVP-5200i 5.2" Modero® ViewPoint® Touch Panel with Intercom
The card should be given the SSID used by the target WAP. If this field is left blank, the device will
attempt to connect to the first available WAP.
One of the most common problems associated with connection to a WAP arises because of an
improperly entered SSID. The same case must be maintained when entering this information. ABC
is not the same as Abc.
The alpha-numeric string is AMX by default, but can later be changed to any 32-character entry.
This string must be duplicated within the Network Name (SSID) field on the WAP. As an example, if
the SSID is TECHPUBS, this word and the case within must match both the Network Name
(SSID) field on the touch panel's Network Name SSID field and on the WAP's Basic Wireless
Configuration page.
Configuring Communication
Select a target
WAP with the desired
level of security
Connecting to the WAP
begins the communication
27