Time & Date Settings Page - AMX Modero ViewPoint MVP-5200i Operation/Reference Manual

Setup Pages
Panel Information Page (Cont.)
Serial Number:
Setup Pages Version:
Screen Width:
Screen Height:
Screen Refresh Rate:
Screen Rotation:
Power Up Page:
Start Up String:
Wake Up String:
Sleep String:
File System:
RAM:
Panel Start Time:
Bulb Hours:
Time & Date Settings Page
The options on the Time & Date Settings page (FIG. 51) allows setting and adjusting of time and date
information on the NetLinx Master. If the time and/or date on the Master is modified, all connected devices
will be updated to reflect the new information.
FIG. 51
Time and Date Setup page
The MVP-5200i does not have an on-board clock, so the only way to modify a panel's
time without altering the Master is via NetLinx Code.
48
Displays the specific serial number value assigned to the panel.
Displays the type and version of the Setup pages being used by the panel.
Displays the screen width (in pixels). MVP-5200i = 640 pixels.
Displays the screen height (in pixels). MVP-5200i = 480 pixels.
Displays the video refresh rate applied to the incoming video signal.
Displays the degree of rotation applied to the on-screen image.
Displays the page assigned to display after the panel is powered-up.
Displays the start-up string.
Displays the wake up string used after an activation from a timeout.
Displays the sleep string used during a panel's sleep mode.
Displays the amount of Compact Flash memory available on the panel.
Displays the available RAM (or Extended Memory module) on the panel.
Displays the time taken by the panel to wake up from sleep mode.
Displays the number of hours elapsed with the display on full power.
MVP-5200i 5.2" Modero® ViewPoint® Touch Panel with Intercom