Sip Settings Page - AMX Modero ViewPoint MVP-5200i Operation/Reference Manual

To change a User Access password:
1.
Press the button corresponding to the user's name in the User Access section.
2.
In the Password keyboard, enter the user's password and press Done.
3.
Press the password button in the right column of the User Access section.
4.
Enter the new password into the Password keyboard and press Done.
To view all previous instances of users accessing the device:
1.
From the Password Settings page, press the Enable button to highlight it. The MVP-5200i will record all
successful and unsuccessful attempts to access the touch panel.
2.
Press the Record button to send a record to the network Master of all recorded attempts to access the
device. This record may be retrieved from the Master at any time.
For more information on removing an MVP-5200i from a MVP-WCS-52 Charging
Station, please refer to the Unlocking the Touch Panel section on page 12.

SIP Settings Page

The options on the SIP Settings page (FIG. 74) enable you to establish network settings for using your touch
panel as an IP phone. With a CSG SIP Communications Gateway (FG2182-01, -02, -03), you can use your
touch panel to make and receive local, long distance, and international phone calls, and have access to phone
features like call waiting, caller ID, call forwarding, call queuing, and voice mail. Setting up your touch panel
as a telephone requires that you set it up as one in the CSG SIP Communications Gateway. Refer to the CSG
SIP Communications Gateway Operation/Reference Guide for information on setting up your touch panel to
work as a telephone.
FIG. 74 SIP Settings page
You may need to load a Duet module to enable the touch panel to receive SIP calls. The Duet module translates
between the standard interface and the device protocol. It parses the buffer for responses from the device,
sends strings to control the device, and receives commands from the UI module or telnet sessions. Refer to the
documentation supplied with the Duet Module for more details.
A sample UI module is provided in the module package. It is not intended to cover
every possible application, but can be expanded as needed by a dealer to meet the
requirements of a particular installation.
MVP-5200i 5.2" Modero® ViewPoint® Touch Panel with Intercom
Protected Setup Pages
79