Automatically Setting Ssid - AMX MVP-5100 Operation/Reference Manual

9. Press the Back button to return to the Protected Setup page and press the on-screen Reboot button
to save any changes and restart the device. Remember that the connection must be configured to a
target Master from the System Settings page.
10. After the panel restarts, return to the Wireless Settings page's Information/Configuration section and
verify the signal level value and signal level.
The signal level bar should provide some informationregarding the strength of the
connection to a Access Point. If no signal or no IP Address is displayed, configuration
of the network could be required.

Automatically Setting SSID

In the Protected Setup page:
1. Select Wireless Settings.
2. Press the Site Survey button at the bottom of the page.
3. Select a WEP secured AP from within the Site Survey page, and press the Connect button
(FIG. 19). .
FIG. 19 Wireless Site Survey page
4. If the security is not handled automatically, the information must be entered manually from the
Wireless Security menu.
MVP-5100/5150 5.2" Modero Viewpoint Touch Panels
Configuring Communication
Select a target
AP with the desired
level of security
Connecting to the AP
begins the communication
31