Configuring The Device's Wireless Card For Unsecured Access To A Wep - AMX Modero ViewPoint MVP-5200i Operation/Reference Manual

Configuring the Device's Wireless Card for Unsecured Access To a WEP

In the Protected Setup page:
1.
Press the Wireless Settings button (located on the lower-left) to open the Wireless Settings page
(FIG. 21).
MVP connection
IP info
FIG. 21 Wireless Settings page (showing a sample unsecured configuration)
2.
Enter the SSID information by:

FIG. 22 Site Survey of available WAPS (Unsecured WAP shown selected)

3.
From within the Wireless Security section, press the Open (Clear Text) button to open the Open (Clear
Text) Settings dialog (FIG. 23). An Open security method does not utilize any encryption methodology,
but does require that an alpha-numeric SSID be entered. This method sends out network packets as
unencrypted text.
MVP-5200i 5.2" Modero® ViewPoint® Touch Panel with Intercom
Automatically filling it by pressing the Site Survey button. From the Site Survey page, choosing an
Open WAP from within the Site Survey page and then pressing the Connect button at the bottom of
the page (FIG. 22).
Manually entering the SSID information into the appropriate fields by following steps 7 through 9.
Configuring Communication
Wireless card
security settings
Select an OPEN
(unsecured) WAP
Connecting to the
WAP begins the
communication.
25