First steps
7. If you want to use the Giga762SX WLAN dsl for Internet telephony, you must config-
ure your VoIP provider's registration data (refer to the section entitled "Setting up In-
ternet telephony (VoIP)" on page 98).
8. If you wish to use other functions of the Giga762SX WLAN dsl, for example the com-
prehensive security features, use the Security Setup (page 50) or the Advanced Set-
up (page 60).
Setting up the Giga762SX WLAN dsl
Front panel
The LEDs (from left to right) have the following functions:
LED
State
On (green)
Power
Off
On
Flashing
ADSL
Off
22
Status
The Giga762SX WLAN dsl is connected to the mains.
The Giga762SX WLAN dsl is disconnected from the mains.
A DSL connection is established.
The DSL line is being synchronised. The synchronisation
phases are shown as slow flashing (registering) and fast
flashing (training).
If no DSL cable is connected, the LED will flash at uniform
intervals.
DSL is deactivated.