Setting Up Scalance S615 And Network - Siemens SCALANCE S615 Getting Started

1.2

Setting up SCALANCE S615 and network

Note
Familiarize yourself with the security instructions before you commission the device. You will
find the security instructions in the operating instructions.
Procedure
1. First unpack the S615 and check that it is undamaged.
2. Fit the power supply.
3. Wire up the S615, see Setup (Page 9).
4. Connect the device to the local network via the Ethernet ports.
5. Turn the device on. After connecting up, the fault LED (F) is lit red.
6. Now, turn on the PC.
SCALANCE S615 Getting Started
Getting Started, 03/2015, C79000-G8900-C390-01
WARNING
Use safety extra-low voltage only
The SCALANCE S615 is designed for operation with safety extra-low voltage. This
means that only safety extra-low voltages (SELV) complying with IEC950/EN60950/
VDE0805 can be connected to the power supply terminals.
The power supply unit for the SCALANCE S615 power supply must meet NEC Class 2,
according to the National Electrical Code(r) (ANSI / NFPA 70).
Connecting SCALANCE S615 to the WAN
1.2 Setting up SCALANCE S615 and network
11