Siemens Giga762SX User Manual page 160

Appendix
Symptom
You cannot conduct VoIP tel-
ephone calls.
Password forgotten or lost.
You cannot access a
resource (drive or printer)
on a different PC.
162
Possible cause and solutions
ì
The phone or the Giga762SX WLAN dsl is not con-
nected properly to the DSL port. Check the cabling
and the ports.
ì
The access data for your VoIP phones is not entered
correctly. Check the access data.
ì
You have not assigned the VoIP phone numbers to
the telephone port. Check the configuration of the
telephone ports and the extensions.
ì
Your VoIP configuration is not set up with the cor-
rect Codecs. Contact your VoIP provider and assign
the correct Codecs (see page 100).
ì
Reset the Giga762SX WLAN dsl (page 26).
Warning: Please bear in mind that this will return all
the configuration settings to the factory settings.
ì
Make sure that TCP/IP has been installed and con-
figured on all the PCs in the local network and that
the PCs all belong to the same workgroup.
ì
Check whether the resource has been released on
the PC in question and whether you have the nec-
essary access rights.
ì
Printing: Check whether the printer has been set up
as a network printer.