Security - Siemens Giga762SX User Manual

u
Registration Button
Shows if the registration button (Scan button) on the device's back panel is enabled
or disabled.
Telephony
u
VoIP accounts
Shows the number of VoIP accounts and the connection status.
USB
u
Status
Status of the USB connection of the device. It can be enabled (On) or disabled (Off).
Additionally, the occurrence of the following problems is displayed:
USB device not supported or not recognized.
USB device not supported (the device exceeds the power consumption limit).
Device
u
System time
The system time of the device.
u
Firmware version
The firmware version currently installed on the device.
ì
Click Refresh to refresh this screen and update the displayed data.

Security

You will find information about possible security risks for the device and the network on
the Security screen in the Status menu.
In the Status menu, select Security:
u
System password not changed
The configuration program of the device is not sufficiently protected against unau-
thorised access because you have not changed the system password since setting up
the device. Information on how to avoid this security risk is given in the section "Sys-
tem Password" on page 122.
u
Identification of your wireless network visible or not changed
Unauthorised users can also find the wireless network easily as you have not
changed the ID of the wireless network (SSID) since setup and have not deactivated
SSID broadcasting. Information on how to avoid this security risk is given in the sec-
tion "Configuring wireless connections" on page 85.
u
Encryption for your wireless network not activated
None of the data in the wireless network is encrypted during
transfer and can therefore easily be intercepted. Unauthorised
users will also have easy access to your network, your PCs and
your Internet connection. Information on how to avoid this secu-
Status information
131