Siemens Giga762SX User Manual page 75

Internet services are addressed via defined port numbers. The Giga762SX WLAN dsl
needs a mapping table of the port numbers to redirect the service requests to the serv-
ers that actually provide the service.
Port Forwarding has been configured for this purpose.
ì
In the Advanced Settings menu, select: Internet – Address Translation (NAT) –
Port Forwarding
ì
Select the required application from the Predefined applications list.
ì
Activate Enabled by ticking the check box.
ì
Click the Add button. The data for the required service is entered on the screen.
ì
Click the Delete button to delete an entry.
If the application you require is not in the list, you must manually enter the relevant data
on the screen:
ì
Select the protocol for the service you are providing from the Protocol list.
ì
Under Public port, enter the port number(s) of the service you are providing.
Configuring Advanced Settings
77