Siemens Giga762SX User Manual page 102

Configuring Advanced Settings
Configuring extensions
The Extension shows either the selected port of the Giga762SX WLAN dsl (Phone 1 or
Phone 2) or the SIP client. The Extension number for the extension is preset and is dis-
played as a call number.
ì
Enter a name for identifying the port in the User name field. You can also leave the
default setting for Phone 1 and Phone 2.
ì
Select the Phone number from the list (your VoIP service provider or one of your
VoIP service providers) for this extension or choose the entry Fixed line.
The list of numbers for Internet telephony is the one you set up in the VoIP menu
(page 99). All outgoing calls are directed by default via this phone number. Incom-
ing calls for the selected phone number are signalled.
ì
Select Receive calls for all numbers if you wish to receive all incoming calls on all
extensions.
ì
You can configure Divert calls with the following options for the Phone 1 and
Phone 2 ports:
– Divert always: Each call for the extension is forwarded to the extension selected
in the Divert calls to field.
– When busy: A call for the extension is forwarded to the selected extension if the
extension is busy.
– No reply: A call for the extension is forwarded to the selected extension if the call
is not answered.
ì
Select the Call waiting option if you want to permit a signal for an incoming call
while you are on a call. (Only for Phone 1 and Phone 2 ports).
104