Siemens Giga762SX User Manual page 107

Notes:
u
If you connect a USB hub to the USB port of the Giga762SX WLAN dsl, you can con-
nect and use a USB memory and a USB printer at the same time.
u
If connecting a device without its own power supply directly to the USB port,
please note that the power consumption must not exceed 500 mA.
u
The Giga762SX WLAN dsl supports USB V 2.0. Devices that support USB V 1.1 may
also be connected.
u
The following file system formats are supported: FAT, FAT32, VFAT
NTFS is not supported.
u
There should be not more than 1000 files stored in any directory of the USB mass
storage device.
ì
Go to the Advanced Settings menu and select: USB
ì
Select the On option for USB.
ì
Click OK to activate the USB port.
If a USB device is connected, its Status is displayed. If a USB mass storage device is con-
nected, the partitions are displayed.
ì
Click Refresh to display the current status.
Configuring Advanced Settings
109