Toggling Telephone Calls; Conference Call Between Three Participants - Siemens Giga762SX User Manual

Call guide

Toggling telephone calls

Key combination
R
Phone number
R2
R0
R1

Conference call between three participants

Key combination
R3
R2
118
Effect
Consultation
Accept call waiting/
toggle between two
calls
Reject call waiting
Terminate one call
and return to the
waiting call
Effect
Conference call
End the conference
call and continue
calls separately
Description
Press R to initiate a consultation with
another phone number during a call.
Dial the desired (internal or external)
number for the consultation.
Press R2 to accept an incoming call
during a call. The connection to the
first call is put on hold.
If you terminate the first call before-
hand, your phone rings and you can
take the second call as usual.
By pressing R2 again, you can toggle
to the waiting caller.
Press R0 to reject an incoming call
during a call.
The second call is rejected automati-
cally after 120 seconds have elapsed.
Press R1 to end the current call. You
then switch to the waiting call. The
second call is ended automatically
when you replace the receiver.
Description
When you are making a call and a sec-
ond call is waiting (see above), press
R3 to enable a conference call
between you and the two call parties.
Press R2 to end the conference call.
You are then connected to the previ-
ously active call again and the previ-
ous waiting call is now in the wait
state again.