Siemens Giga762SX User Manual page 53

WPA-PSK is a special WPA mode for private users and users in small companies without
their own authentication server. After a certain period of time
tion keys are automatically generated with the pre-shared key, automatically changed
("rekeying") and authenticated between the devices.
Note:
Every PC (network adapter) that requires access to a WPA-protected wireless network
must also support WPA. Information about this can be found in the operating manual
for your network adapter.
This page shows the preset encryption settings.
ì
If you do not want to change the encryption settings, click on Next >.
If you yo want to change the pre-shared key:
ì
Select WPA2-PSK if WPA2 is supported by all components in the wireless network.
ì
Select WPA-PSK only if WPA is supported by all components in the wireless network.
ì
Select WPA2-PSK / WPA-PSK if only some components in the wireless network sup-
port WPA.
ì
Enter a key of your choice in the Pre-shared key field (min. 8 to max. 63 characters)
and confirm it by repeating the entry. You must set up the same pre-shared key for
all wirelessly connected PCs. Use a combination of letters, digits and special charac-
ters.
ì
By clicking the Unmask button, a message showing the pre-
shared key is output in readable characters.
ì
To go to the next step, click Next >
Security Setup Wizard
(Rekey interval), encryp-
55