Siemens Giga762SX User Manual page 95

All repeaters/access points in range are displayed with the following information:
– SSID
– MAC address
– Channel
– Type (11b or 11g)
The Signal strength of the connection to the repeater, if one exists, is shown as a per-
centage. You can use this data to determine the best possible location for your repeater.
You can register a maximum of three repeaters to extend your WLAN.
ì
Select the Active check box to register a repeater to your wireless network.
Note:
The registered but currently unavailable repeaters are presented only by their MAC
addresses.
ì
Click Refresh to update the display.
ì
Click OK to apply the settings.
Configuring Advanced Settings
97