Removing/Installing/Adjusting Center Mount Adjustable Knee Angle Footrest; Removing; Installing - Invacare Pronto M71 Jr. with SureStep Owner's Operator And Maintenance Manual

4. Secure the telescoping front rigging support at the desired depth with the existing two
mounting bolts, spacers and end cap. Securely tighten.
5. Repeat STEPS 1-4 for the other telescoping front rigging support.
Spacer
Mounting Bolts
FIGURE 10.6 Adjusting/Replacing Telescoping Front Rigging Supports
Removing/Installing/Adjusting Center Mount
Adjustable Knee Angle Footrest

Removing

NOTE: For this procedure, refer to Detail "A" of FIGURE 10.7 on page 64.
1. Remove the rigging pivot pin that secures the footrest to the mounting bracket of the
seat frame.
2. Hold the center mount rigging with one hand and engage the release lever with the
other hand.
3. Pull the center mount rigging out of the mounting bracket of the seat frame.

Installing

NOTE: For this procedure, refer to Detail "A" of FIGURE 10.7 on page 64.
1. Engage the release lever with the one hand and hold the center mount footrest with
the other
2. Insert the center mount footrest into the mounting bracket of the seat frame.
3. Reinstall the rigging pivot pin to secure the center mount footrest to the mounting
bracket of the seat frame.
Part No 1122147
SECTION 10—FRONT RIGGINGS
Seat
Frame
63
Pronto
End Cap
Mounting Holes
Telescoping Front
Rigging Supports
® ™
M71 Jr. with SureStep
®