Additional Printer Setup; Installing Internal Options - Lexmark XM7100 Series User Manual
Machine type(s): 7463 model(s): 496, 696, 896
Hide thumbs
Also See for XM7100 Series:
- User manual (397 pages) ,
- User manual (395 pages) ,
- User manual (388 pages)
Table of Contents
Advertisement
Additional printer setup
Additional printer setup
Installing internal options
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.
Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity.
Touch a metal surface on the printer before touching any controller board electronic components or connectors.
Available internal options
•
Memory card
–
DDR3 DIMM
–
Flash memory
•
Fonts
•
Firmware cards
–
Forms barcode
–
PRESCRIBE
–
IPDS
–
Printcryption
TM
•
Lexmark
Internal Solutions Ports (ISP)
–
Parallel 1284-B interface
TM
–
MarkNet
N8350 802.11 b/g/n wireless printer server
–
MarkNet N8130 10/100 fiber interface
–
RS-232-C serial interface
Accessing the controller board
Note: This task requires a flat‑head screwdriver.
28
Advertisement
Table of Contents
