Lexmark XM7100 Series User Manual page 196

Understanding the printer menus
Use
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Paper Saver
Off
2‑up Portrait
2‑up Landscape
4‑up Portrait
4‑up Landscape
Print Page Borders
On
Off
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
Punch
Off
2 holes
3 holes
4 holes
Staple
Off
On
To
Specify whether an original document is two‑sided (duplex) or one‑sided, and then to
specify whether the copy should be two‑sided or one‑sided.
Notes:
•
1 sided to 1 sided—The original document has print on one side and the copy
will also have print on one side.
•
1 sided to 2 sided—The original document has print on one side, while the
copy will have print on both sides.
•
2 sided to 1 sided—The original document has print on both sides, while the
copy will have print on just one side.
•
2 sided to 2 sided—The original document has print on both sides, and the
copy will also have print on both sides.
Copy two or four sheets of a document on one page.
Note: Off is the factory default setting.
Specify whether or not a border is printed.
Note: Off is the factory default setting.
Keep the pages of a print job stacked in sequence when printing multiple copies.
Note: "(1,2,3) (1,2,3)" is the factory default setting.
Specify the type of hole punch finishing to be used in a print or copy job.
Note: Off is the factory default setting.
Enable or disable the staple finisher.
Notes:
•
Off is the factory default setting.
•
This menu item appears only when a staple finisher is installed.
196