Load Staples - Lexmark XM7100 Series User Manual

Troubleshooting
•
From the printer control panel, touch Automatically select paper to use the paper loaded in the tray.
• Cancel the print job.

Load staples

Try one or more of the following:
•
Replace or insert the staple cartridge in the finisher.
For instructions on inserting or replacing a staple cartridge in the finisher, touch More information on the printer
control panel.
•
From the printer control panel, touch Continue to clear the message and continue printing.
•
From the printer control panel, touch Cancel job to cancel the print job.
Maintenance kit low [80.xy]
You may need to order a maintenance kit. For more information, visit the Lexmark support Web site at
http://support.lexmark.com
If necessary, touch Continue to clear the message and continue printing.
Maintenance kit nearly low [80.xy]
For more information, visit the Lexmark support Web site at
and then report the message.
If necessary, touch Continue to clear the message and continue printing.
Maintenance kit very low, [x] estimated pages remain [80.xy]
You may need to replace the maintenance kit very soon. For more information, visit the Lexmark support Web site at
http://support.lexmark.com
If necessary, touch Continue to clear the message and continue printing.
Memory full [38]
Try one or more of the following:
• From the printer control panel, touch Cancel job to clear the message.
• Install additional printer memory.
Memory full, cannot print faxes
From the printer control panel, touch Continue to clear the message without printing. Held faxes attempt to print after
the printer is restarted.
or contact customer support, and then report the message.
or contact customer support, and then report the message.
http://support.lexmark.com or contact customer support,
304