Ip Address; Ip Alias Setup; Figure 247 Menu 5: Tcp/Ip Setup; Figure 248 Menu 5.2: Tcp/Ip Setup - ZyXEL Communications ZyWall 70 User Manual

ZyWALL 70 User's Guide

31.3.1 IP Address

From the main menu, enter 5 to open Menu 5 - DMZ Setup to configure TCP/IP (RFC 1155).

Figure 247 Menu 5: TCP/IP Setup

From menu 5, select the submenu option 2. TCP/IP Setup and press [ENTER]. The screen
now displays Menu 5.2 - TCP/IP Setup

Figure 248 Menu 5.2: TCP/IP Setup

The TCP/IP setup fields are the same as the ones in Menu 3.2 - TCP/IP Ethernet Setup.
Each public server will need a unique IP address. Refer to
information on how to configure these fields.
Note: DMZ and LAN IP addresses must be on separate subnets. You must also
configure NAT for the DMZ port (see
and 15.2.

31.3.2 IP Alias Setup

You must use menu 5.2 to configure the first network. Move the cursor to the Edit IP Alias
field, press [SPACE BAR] to choose Yes and press [ENTER] to configure the second and
third network.
Pressing [ENTER] opens Menu 5.2.1 - IP Alias Setup, as shown next.
454
Menu 5 - DMZ Setup
1. DMZ Port Filter Setup
2. TCP/IP Setup
Enter Menu Selection Number:
Menu 5.2 - TCP/IP Ethernet Setup
TCP/IP Setup:
IP Address= 0.0.0.0
IP Subnet Mask= 0.0.0.0
RIP Direction= Both
Version= RIP-1
Multicast= None
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:
,
as shown next.
Section 29.4 on page 442
Chapter 35 on page
for
473) in menus 15.1
Chapter 31 DMZ Setup