Inserting A Name Server Record; Figure 162 System Dns: Add Address Record; Table 121 System Dns: Add Address Record - ZyXEL Communications ZyWall 70 User Manual

Internet security appliance

Hide thumbs Also See for ZyWall 70:

Table of Contents

The following table describes the labels in this screen.

21.6.2 Inserting a Name Server record

Click Insert in the System screen to insert a name server record.

Chapter 21 DNS

Type a fully qualified domain name (FQDN) of a server. An FQDN starts with a

host name and continues all the way up to the top-level domain name. For

example, www.zyxel.com.tw is a fully qualified domain name, where "www" is the

host, "zyxel" is the second-level domain, and "com.tw" is the top level domain.

If this entry is for one of the WAN ports, select WAN Interface and select WAN 1

or WAN 2 from the drop-down list box.

For entries that are not for one of the WAN ports, select Custom and enter the IP

address of the host in dotted decimal notation.

Select the check box to enable DNS wildcard.

Click Apply to save your changes back to the ZyWALL.

Click Cancel to exit this screen without saving.

ZyWALL 70 User's Guide