Supported Mibs; Snmp Traps; Remote Management: Snmp; Table 130 Snmp Traps - ZyXEL Communications ZyWall 70 User Manual

22.14.1 Supported MIBs

The ZyWALL supports MIB II that is defined in RFC-1213 and RFC-1215. The focus of the
MIBs is to let administrators collect statistical data and monitor status and performance.

22.14.2 SNMP Traps

The ZyWALL will send traps to the SNMP manager when any one of the following events
occurs:

Table 130 SNMP Traps

TRAP # TRAP NAME
0 coldStart (defined in RFC-1215)
1 warmStart (defined in RFC-1215) A trap is sent after booting (software reboot).
4 authenticationFailure (defined in
RFC-1215)
6 whyReboot (defined in ZYXEL-
MIB)
6a For intentional reboot :
6b For fatal error :

22.14.3 REMOTE MANAGEMENT: SNMP

To change your ZyWALL's SNMP settings, click REMOTE MGMT, then the SNMP tab.
The screen appears as shown.
Chapter 22 Remote Management
DESCRIPTION
A trap is sent after booting (power on).
A trap is sent to the manager when receiving any SNMP
get or set requirements with the wrong community
(password).
A trap is sent with the reason of restart before rebooting
when the system is going to restart (warm start).
A trap is sent with the message "System reboot by user!"
if reboot is done intentionally, (for example, download
new files, CI command "sys reboot", etc.).
A trap is sent with the message of the fatal code if the
system reboots because of fatal errors.
ZyWALL 70 User's Guide
371