Figure 33 Wireless: Static Wep; Table 26 Wireless: Static Wep - ZyXEL Communications ZyWall 70 User Manual

ZyWALL 70 User's Guide

Figure 33 Wireless: Static WEP

The following table describes the wireless LAN security labels in this screen.

Table 26 Wireless: Static WEP

LABEL
Security
WEP
Encryption
Key 1 to Key 4 If you chose 64-bit WEP in the WEP Encryption field, then enter any 5 characters
Apply
Reset
118
DESCRIPTION
Select Static WEP from the drop-down list.
WEP (Wired Equivalent Privacy) provides data encryption to prevent unauthorized
wireless stations from accessing data transmitted over the wireless network.
Select 64-bit WEP or 128-bit WEP to enable data encryption.
(ASCII string) or 10 hexadecimal characters ("0-9", "A-F") preceded by 0x for each
key.
If you chose 128-bit WEP in the WEP Encryption field, then enter 13 characters
(ASCII string) or 26 hexadecimal characters ("0-9", "A-F") preceded by 0x for each
key.
There are four data encryption keys to secure your data from eavesdropping by
unauthorized wireless users. The values for the keys must be set up exactly the same
on the access points as they are on the wireless stations.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Chapter 6 Wireless LAN