Dhcp Table Screen; Figure 10 Home : Show Statistics: Line Chart; Table 7 Home: Show Statistics: Line Chart - ZyXEL Communications ZyWall 70 User Manual

Internet security appliance

Hide thumbs Also See for ZyWall 70:

Table of Contents

The following table describes the labels in this screen.

2.4.5 DHCP Table Screen

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual

clients to obtain TCP/IP configuration at start-up from a server. You can configure the

ZyWALL as a DHCP server or disable it. When configured as a server, the ZyWALL provides

the TCP/IP configuration for the clients. If DHCP service is disabled, you must have another

DHCP server on your LAN, or else the computer must be manually configured.

Click Show DHCP Table in the HOME screen when the ZyWALL is set to router mode.

Read-only information here relates to your DHCP status. The DHCP table shows current

DHCP client information (including IP Address, Host Name and MAC Address) of all

network clients using the ZyWALL's DHCP server.

Chapter 2 Introducing the Web Configurator

Click the icon to go back to the Show Statistics screen.

Select the check box(es) to display the throughput statistics of the corresponding

Specify the direction of the traffic for which you want to show throughput statistics in

Select Tx to display transmitted traffic throughput statistics and the amount of traffic

(in bytes). Select Rx to display received traffic throughput statistics and the amount

of traffic (in bytes).

Set the range of the throughput (in B/s, KB/s or MB/s) to display.

Click Set Range to save this setting back to the ZyWALL.

ZyWALL 70 User's Guide