Certificates Commands; Table 245 Certificates Commands; Appendix O Certificates Commands - ZyXEL Communications ZyWall 70 User Manual

The following describes the certificate commands. See
information on the command structure.
All of these commands start with certificates.

Table 245 Certificates Commands

COMMAND
my_cert

Appendix O Certificates Commands

Certificates Commands

DESCRIPTION
create
create selfsigned
<name>
<subject>
[key size]
create request
<name>
<subject>
[key size]
create scep_enroll
<name> <CA
addr> <CA
cert> <auth
key>
<subject>
[key size]
A
P P E N D I X
Appendix L on page 657
Create a self-signed local host certificate.
<name> specifies a descriptive name for the
generated certificate. <subject> specifies a
subject name (required) and alternative name
(required). The format is "subject-name-
dn;{ip,dns,email}=value". If the name contains
spaces, please put it in quotes. [key size]
specifies the key size. It has to be an integer
from 512 to 2048. The default is 1024 bits.
Create a certificate request and save it to the
router for later manual enrollment. <name>
specifies a descriptive name for the generated
certification request. <subject> specifies a
subject name (required) and alternative name
(required). The format is "subject-name-
dn;{ip,dns,email}=value". If the name contains
spaces, please put it in quotes. [key size]
specifies the key size. It has to be an integer
from 512 to 2048. The default is 1024 bits.
Create a certificate request and enroll for a
certificate immediately online using SCEP
protocol. <name> specifies a descriptive name
for the enrolled certificate. <CA addr> specifies
the CA server address. <CA cert> specifies the
name of the CA certificate. <auth key> specifies
the key used for user authentication. If the key
contains spaces, please put it in quotes. To
leave it blank, type "". <subject> specifies a
subject name (required) and alternative name
(required). The format is "subject-name-
dn;{ip,dns,email}=value". If the name contains
spaces, please put it in quotes. [key size]
specifies the key size. It has to be an integer
from 512 to 2048. The default is 1024 bits.
ZyWALL 70 User's Guide
O
for
669