Control Panel Messages; Error Detection - Breville Gourmet Baker BBM400 Instruction Booklet

OPERATING yOUR BREvILLE PROdUCT

CONTROL PANEL MESSAGES

Error detection

When the START | CANCEL button has
been pressed to begin the process and there
is a problem relating to the sensor, beeps
will sound and then the LCD screen will
display the particular error message specific
to the problem.
There are 4 different error messages:
ERROR COdE
E01
E00
EEE
HHH
PROBLEM
Attempting to use the
bread maker shortly
after a loaf has been
baked and its interior
will still be warm,
that is the sensor
temperature will still
be above 50°C.
The bread maker is
used in an extremely
cold environment
below -10°C.
CORRECTION
Unplug the bread maker from the power
outlet. Open the lid, remove the bread pan
and allow the oven cavity sufficient time
to cool before operating the bread maker
again.
Place the bread maker in a warmer
environment. Recommended room
temperature 20-25ºC.
Contact your nearest authorised Breville
Service Centre (refer to the back page
for details).
Contact your nearest authorised Breville
Service Centre (refer to the back page
for details).
Ensure the bread maker is turned off
by pressing and holding the CANCEL
button. Remove the power plug from the
power outlet. Allow the bread maker and
all accessories to cool completely before
disassembling and cleaning.
17