Control Panel Messages - Breville Bread Master Big Loaf BB380 Instruction And Recipe Book

Control Panel
Messages

Control Panel Messages

– Error Detection
When the START/Stop button has been pressed to
begin the baking process and there is a problem
relating to the sensor, the machine will beep twice
and then flash the particular error message specific
to the problem. There are 6 different messages.
Error Message
E:01
If the error messages E:02-E:05, E:08 appear in the
display window contact your nearest autorised
Breville Service Centre.
23
Control Panel Messages
Problem
If the bread maker is used shortly
after a previous loaf has been
baked, its interior will still be
warm, ie, the sensor temperature
will still be above 40 o C.
Correction
Press Start/STOP to reset. Open
the lid and remove the bread pan
to cool. Always allow the bread
machine sufficient time to cool
before using again.