Eth Bridge Dynvlan Add - THOMSON TG587n Reference Manual

eth Commands

eth bridge dynvlan add

Add a dynamic VLAN membership entry.
SYNTAX:
eth bridge dynvlan add
where:
id
hwaddr
vlan
remvlan
E-DOC-CTC-20080619-0003 v1.0
[id = <number{0-100000}>]
hwaddr = <masked-hardware-address>
vlan = <{default}>
[remvlan = <{default}>]
The id of the dynamic VLAN membership entry.
The (masked) ethernet MAC address of the
dynamic VLAN membership entry.
The VLAN for the dynamic VLAN membership
entry.
The VLAN that will be removed from the bridge
interface.
OPTIONAL
REQUIRED
REQUIRED
OPTIONAL
307