grp config
Set the grp configuration settings.
SYNTAX:
grp config
where:
cdistance
kdistance
rdistance
trace
458
[cdistance = <number{0-255}>]
[kdistance = <number{0-255}>]
[rdistance = <number{0-255}>]
[trace = <{disabled|enabled}>]
Set the distance of the connected route type.
Default distance is 0.
Set the distance of the kernel route type. Default
distance is 1.
Set the distance of the RIP route type. Default
distance is 120.
Enable/Disable tracing.
grp Commands
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20080619-0003 v1.0