Function Button - GE Security DVMRe Matrix User Manual

Activity Grid Setup Screen
Pressing the Function button will bring up the Help screen shown on the next page. This screen will
overlay the current video image.
{F}
Function
Button
Sensitivity Scope
Use the sensitivity scope to adjust the motion detection sensitivity for the scene. The
sensitivity scope is the bar located near the left-hand corner of the screen.
The black bar raises and lowers to indicate the degree of motion detected. When the
black bar reaches the red bar, a motion detection alarm is activated.
Adjusting Motion Detection Sensitivity: Raise and lower the red bar to change the
motion detection sensitivity. Use the Play Forward button to increase the sensitivity level
and the Play Reverse button to decrease the sensitivity level. The sensitivity level is also
displayed as a numeric value.
Play Reverse to decrease the Sensitivity
0150-0242D
5
'MENU' : Exit Activity Setup
'ENTER': Save and Exit Activity Setup
'PAUSE': Toggle between Enable and Neutral
'STOP' : Toggle between Disable and Neutral
'ZOOM' : Disable/Enable all zones
'PLAY FORWARD': Increase the Sensitivity level
"PLAY REVERSE': Decrease the Sensitivity level
53
Play Forward to increase the Sensitivity
GE Security DVMRe Matrix