Table of Contents
Advertisement
AUX Port
The back panel of the unit is equipped with an Aux Port
(DB-9 style connector).
Do not attempt to wire directly to the DB-9
connector on the back panel.
Matrix Audio PCB
The Matrix Audio PCB connects to the DVMRe Matrix via the Aux Port. The Matrix Audio PCB
provides connectors for the Audio Input and Output, and BNC connectors for Monitors C, D, and E.
1. Audio Output: RCA jack.
2. Audio Input: RCA jack.
3. Composite Monitor-C Output: Composite video
output with BNC style connector.
4. Composite Monitor-D Output: Composite video
output with BNC style connector.
5. Composite Monitor-E Output: Composite video
output with BNC style connector.
Warning! The use of clandestine listening and recording devices is forbidden by
Federal Law as well as other State and Municipal Jurisdictions. Please review local and
Federal Law prior to the installation or operation of this equipment to ensure that you
are in legal compliance with the Authorities having Jurisdiction.
RS485 Connector
Shields are grounded at one end, preferably at the
DVMRe Matrix.
See section 3.17 for information about configuring
the RS485 network address settings in the menu
system.
RJ-45 Pin Configuration For RS485 Port
Pin
Use
1
Ground (Shield)
2
Not Connected
3
Network +VE
4
Not Connected
0150-0242D
DB-9 Connector on Back Panel
1
Wire Type: #24 AWG, twisted pair with shield
Connector Type: RJ-45
Max. Cable Length: 3200 feet / 1000 meters
Pin
Use
5
Not Connected
6
Network -VE
7
Ground (Shield)
8
Not Connected
12
1
5
6
9
COPYRIGHT
0900-0156 REV
AUDIO
AUDIO
OUT
IN
MON C
MON D
MON E
3
4
5
Matrix Audio PCB
(2-wire)
1
2 3 4 5 6 7
RJ-45 socket on
back panel.
GE Security DVMRe Matrix
2
8
Advertisement
Table of Contents
