Sequencing - GE Security DVMRe Matrix User Manual

3.9 Sequencing

Use this menu to specify:
•
The multiscreen dwell time.
•
The full screen dwell time.
•
Enable and setup Salvo Switching.
The dwell time is the amount of time each camera is displayed on-screen (while sequencing) before
advancing to the next camera.
Salvo switching is a feature that enables Monitors B through E to sequence simultaneously among
groups of cameras.
Main Menu → Sequencing → Multiscreen Dwell
q
Rotate the Jog to change the desired dwell time (from 1 to 30 seconds).
The default is 3 seconds.
1. Press the Enter button to confirm the selection and exit the menu.
2. Press the Menu button to exit the menu without making changes.
Main Menu → Sequencing → Fullscreen Dwell
q
Rotate the Jog to change the desired dwell time (from 1 to 30 seconds).
The default is 3 seconds.
1. Press the Enter button to confirm the selection and exit the menu.
2. Press the Menu button to exit the menu without making changes.
Main Menu → Sequencing → Salvo Switching
q
Salvo Switching is a feature that enables Monitors B through E to
sequence simultaneously among groups of cameras. Use this menu
to:
•
Enable or Disable Salvo Switching
•
Setup Salvo Switching.
Main Menu → Sequencing → Salvo Switching → Salvo Enable
q
Use this menu to enable or disable Salvo Switching.
Activation of Salvo Switching
When Salvo Switching is activated, Monitors B through E
sequence simultaneously, according to the parameters
programmed in the menus. With Salvo Switching enabled,
Salvo Switching is activated as follows:
1. Select a monitor (B through E) by pressing its button.
0150-0242D 34
Multiscreen Dwell
Fullscreen Dwell
Salvo Switching
Multiscreen Dwell
(Time in Seconds)
03
Fullscreen Dwell
(Time in Seconds)
03
Salvo Enable
Salvo Setup
Salvo Switching
Enable
GE Security DVMRe Matrix