GE Security DVMRe Matrix User Manual page 55

Camera Title Edit Menu
1. With the camera title selected, press the Enter button. The menu will enter the Edit mode and the
character bank will appear in the center of the menu.
2. Press the Sequence button to select the desired character set.
3. Rotate the Shuttle to navigate the cursor in the camera title.
4. Rotate the Jog to navigate the cursor in the character bank.
5. Press the Number 1 button to insert a blank character or press the Number 2 button to insert the
selected character.
6. When finished editing the title, press the Enter button to exit the edit mode.
7. Save changes and exit the menu: Select [OK], then press the Enter button.
8. Exit the menu without making changes: Press the Menu button, or select [CANCEL], then press
the Enter button.
Main Menu → Camera Setup → AGC
q
Use the Automatic Gain Control (AGC) to adjust the video input
signal level for cameras whose level is outside the normal range.
The default gain setting is 100%.
Rotate the Jog to navigate and the Shuttle to change the values.
Save changes and exit the menu: Select [OK], then press the
Enter button.
Exit the menu without making changes: Press the Menu button,
or select [CANCEL], then press the Enter button.
Main Menu → Camera Setup → Camera Disable
q
Use this menu to:
•
Enable or Disable cameras individually
•
Configure the unit to disable cameras automatically at power-up
if video loss is detected.
•
Automatically disable all inputs detecting videoloss.
Individual Disable
Use this menu to Disable or Enable each camera input
individually.
Use the Jog to navigate and the Shuttle to change the values.
Save changes and exit the menu: Select [OK], then press
the Enter button.
Exit the menu without making changes: Press the Menu
button, or select [CANCEL], then press the Enter button.
0150-0242D 55
Signal Gain Setup
Camera 01
Signal Gain 100%
[CANCEL] [OK]
Individual Disable
Power Up Disable
Auto Disable Now
Camera Disable
Camera 01: Disable
Camera 02: Enable
Camera 03: Disable
Camera 04: Enable
:
:
Camera 16: Enable
[CANCEL] [OK]
GE Security DVMRe Matrix