Table of Contents
Advertisement
114 en | Troubleshooting coordinators, points and receivers
Element
[Clear]
[Print]
9.6.1
Edit Subscriber's Database Record
To create a new or edit an existing subscriber, the following information must be entered to
complete the changes: subscriber name, subscriber identification number, and transmitter
identification code. The computer does not allow the edit screen to be closed until all of the
mandatory fields are completed. The accuracy of information in the Subscriber database is
very important: in the event that a subscriber transmits an alarm, the information displayed in
the alarm screen is taken from this database. A faulty address could hinder security's
response to an alarm.
Figure 9.6: Edit Subscriber's Database Record dialog
2018.03 | SE3v1.0 | DOC
Usage/Description
Click the [Clear] button to remove the Low Battery indication. This should
only be done after the transmitter battery is replaced or a new transmitter is
issued.
Click the [Print] button to open the Subscriber Print dialog window.
Technical Reference Manual
Security Escort
Robert Bosch (SEA) Pte Ltd
Advertisement
Table of Contents
