Fm Radio Operation; Cd Operation; Bluetooth Operation - Sharp CD-BH10 Operation Manual

Operations

■ FM radio operation

1.
Press the button on the unit or the INPUT button
on the remote control to enter the FM mode. (FM
frequency: 87.50-108.00MHz)
2.
Press the Tuning
to decrease or increase the frequency in 0.05MHz
increments.
3.
Press and hold the
to scan through the frequency range quickly. The scan
will stop once it has found a station.
4.
Press and hold the
frequency range quickly; it will store any stations
found automatically.
5.
SAVE a station: You can store up to 40 FM stations
in memory.
Press the PROG/MEMORY button and enter the
frequency you want to store using the number
buttons.
Press the SAVE button. It will show " P01" on the
display.
Press the button to select the station preset
number under which you want to save the frequency.
Press the PROG/MEMORY button again to confirm.
6.
Recall the preset stations: Press the
recall your stored stations.

■ CD operation

1.
Press the INPUT button
button on the remote control to enter the CD mode.
Press the button to open the disc drawer, put a CD
in, then press the
2.
Press the button to pause or play the song.
3.
Press the button on the remote control to stop
playing, press the
4.
Press the button to skip to the previous or next
song.
5.
Press the button on the remote control to
fast forward or fast rewind the playback, and press
repeatedly to resume normal speed.
6.
To select a specific song directly, and press the
number buttons 0-9 on remote control.
Example:
If the track number consists of two digits, for example,
25, press button "2", and then button "5" to select the
25th track.
If the track number is a one-digit number, for
example, 9, press "0" first, then "9" to skip to the 9th
track.
7.
REPEAT button: While in playing mode, press the
button to set repeat mode.
Press the button to repeat playing songs for CD
and CD-R discs .
Press once to repeat current song. Press again to
repeat all tracks.
Press a third time to cancel.
8.
Press the button on the remote control to play the
tracks in random order. Press again to resume.
CD-BH10_EN.indd 11 CD-BH10_EN.indd 11
or buttons on the remote control
buttons on the remote control
button to scan through the
button to
on the unit, or INPUT
button again to close.
button to restart.
9.
You can set the disc to play tracks in a programmed
order:
Press the button on the remote control to stop
playing.
Press the PROG/MEMORY button on the remote
control.
The screen displays: P01.
Press the number buttons on the remote control to
select the tracks to program.
Press the buttons on the remote control to skip
between the program tracks.
Press the PROG/MEMORY button on the remote
control to confirm.
To begin the programmed order, press the
button.
To cancel the program sequence, press the
twice.
Notes:
MP3 format is supported.
Unsupported file formats are skipped.
For example, Word documents(.doc) or MP3 files with
extension .dlf are ignored and not played.

■ Bluetooth operation

Pairing and playback
1.
Press the button on the unit, or button on the remote
control button repeatedly to enter the Bluetooth
mode, the"bt" message appears and flashes on the
display.
2.
Activate your Bluetooth device and select the search
mode.
3.
Select "CD-BH10 SHARP" from the search list and
connect.
4.
Enter "0000" for a password if prompted.
5.
When the devices are connected to each other,
a confirmation sound will be made. "bt" will stop
flashing in the display.
6.
You can now playback music from your device.
Please note that the volume on the Bluetooth source
device operates independently to the volume of the
unit.
7.
To turn off the Bluetooth function: switch to another
function on this unit, disable the function on your
Bluetooth source device, or press the
remote control.
E-11
button
button on the
7/7/23 2:49 PM 7/7/23 2:49 PM