MUTOH Osprey 75 User Manual page 88

Select an item among the following and press the appropriate key, from [F1] key to [F4] key.
Step 5 :
Setup items
Test Print (1/4)
Test Print (2/4)
Test Print (3/4)
Test Print (4/4)
Printing the selected item.
Step 6 :
Wait until printing is finished and the printer has been returned to the normal status.
Step 7 :
Parameters
Perform Setup List printing.
Setup
Refer to: "Setup List"
Perform Setup list, the User Paper list, and the Print Mode
SetupALL
list printing.
Refer to: "Setup List"
Perform Nozzle check 1 (horizontal line) pattern printing.
Nozzle Chk 1
Refer to: "Nozzle Check"
Perform Nozzle check 2 (step line) pattern printing.
Use this function when it is difficult to check if there is any
Nozzle Chk 2 clogging of nozzles, missing dots, or faint printing by using
Nozzle check 1 pattern.
Refer to: "Palette"
To print an adjust pattern in quality mode, unidirectional-
Uni-Qlty 1
single path.
Refer to: "Alignment"
To print an adjust pattern in quality mode, unidirectional-
Uni-Qlty 2
double path.
Refer to: "Alignment"
To print an adjust pattern in speed mode, unidirectional-
Uni-Spd 1
single path.
Refer to: "Alignment"
To print an adjust pattern in speed mode, unidirectional-
Uni-Spd 2
double path.
Refer to: "Alignment"
To print an adjust pattern in quality mode, Bidirectional-single
Bi-Qlty 1
path.
Refer to: "Alignment"
To print an adjust pattern in quality mode, Bidirectional-
Bi-Qlty 2
double path.
Refer to: "Alignment"
To print an adjust pattern in speed mode, Bidirectional-single
Bi-Spd 1
path.
Refer to: "Alignment"
To print an adjust pattern in speed mode, Bidirectional-
Bi-Spd 2
double path.
Refer to: "Alignment"
Palette Perform Palette printing
User's Guide – Osprey 75/102/130
Chapter 5: Preparations before printing
Descriptions
88 AP-75102, Rev. 2.0, 28/11/2007