Setup items
Setup menu (1/5)
Setup menu (2/5)
Setup menu (3/5)
Setup menu (4/5)
Setup menu (5/5)
Setup menu (1/5 to 5/5)
Parameters
Origin Set
Test Print
Media Set
Set Review
Print Mode
Command
Layout
Function
Roll Setup
Centro.
Network
Backup
Utility
File Mng.
Initial.
Data Dump
Head Wash
Long Save
Mainte.
–
User's Guide – Osprey 75/102/130
Descriptions
To set the start position (origin) for printing data.
Refer to: "Origin setup menu"
To perform Test print.
Refer to: "Test print menu"
To perform various settings for media.
Refer to: "Media setup menu"
To check the setup values for the printer.
Refer to: "Set review menu"
To perform various settings in the Printing mode.
Refer to: "Printing mode menu"
To perform various settings in printer commands.
Refer to: "Command setup menu"
Makes various settings on layout function.
Refer to: "Layout setup menu"
To perform various settings for processing of printing
data. Refer to: "Function setup menu"
To perform various settings for roll media.
Refer to: "Roll Media setup menu"
To set communication mode to Centronics interface.
Refer to: "Centronics menu"
To set the network interface IP address.
Refer to: "Network setup menu"
To backup the set parameters.
Refer to: "Backup setup menu"
Makes various advanced function settings.
Refer to: "Utility menu"
Makes various settings for the processing method of
the printing data sent from a computer to the installed
hard disk in the printer.
Refer to: "File management setup menu"
Returns parameters to the factory setting.
Refer to: "Initialize setup menu"
To perform dump printing for online function check.
Refer to: "Data dump menu"
To perform process for washing print head.
Refer to: "Head wash menu"
To perform process for Long-term storage cleaning.
Refer to: "Long-term storage cleaning" menu
To check the parts' life cycle of the product.
Refer to: "Maintenance status" menu
[CANCEL] key: To cancel the setup menu, and to shift
to the normal condition.
113
Chapter 6: Printer menu
AP-75102, Rev. 2.0, 28/11/2007