MUTOH Osprey 75 User Manual page 57

Refill the jet wash fluid when the following occurs.
a. When the jet wash fluid inside the main tank is run out
•
Printing will continue to be performed.
•
Refill the new jet wash fluid immediately.
•
The following message is displayed on the operation panel.
(2) Types
Notes
•
Use MUTOH recommended ink only.
The printer is designed for use with genuine ink cartridges. If you do not use genuine products,
o
Print outs may become faint and the printer will not be able to detect the end of ink.
o
Problems caused by using ink other than the recommended will void the warranty.
o
•
Refer to the following for the types and details of ink and the ink jet wash fluid.
See "Options/Supply list"
(3) Refilling procedure
Follow the steps in "Filling the ink - jet wash fluid" to refill the ink.
Notes
•
If ink is refilled during printing, printing is resumed.
User's Guide – Osprey 75/102/130
57
Chapter 3: Basics
AP-75102, Rev. 2.0, 28/11/2007