MUTOH Osprey 75 User Manual page 86

2. Wipe the heads
Open the maintenance cover.
Step 1 :
Put the purge plate down the purge stand.
Step 2 :
Lightly wipe off the ink accumulated on the print head using the attached print head wiper. Wipe
Step 3 :
from the back to the front of the head surface.
Notes
•
All print head surfaces should be wiped off, even after purging 1 colour only. Otherwise, ink may drip
from the print head at which purging was not performed.
Lift the purge plate to fix it.
Step 4 :
Close the maintenance cover; ensure that the cover has been firmly fixed.
Step 5 :
No. Name
1 Purge plate
No. Name
1 Print head
2 Print head wiper
86
User's Guide – Osprey 75/102/130
Chapter 5: Preparations before printing
AP-75102, Rev. 2.0, 28/11/2007