MUTOH Osprey 75 User Manual page 103

6.2.3 [F3] – Winding the roll media
Perform winding of the media according to the procedure below.
Verify that the printer is not printing
Step 1:
Press the [F3] key on the control panel. See below.
Step 2:
Press the appropriate key in the 'Feed&Reel' menu, press [F1] key to [F4] key or the down key to
Step 3:
shift to the second 'Feed&Reel' menu.
•
The printer works as follows:
Setup items Parameters
Feed & Reel
Notes
•
When selecting "R. Reverse" to rewind the roll media, not to over-rewind.
The scroller may come up from the winding unit and drop out.
Notes
•
The Operating directions of the winding unit and the roll media are shown below.
Feed&Reel (1/2)
Feed&Reel (2/2)
Descriptions
The winding unit rotates in
the advance direction.
F. Order
The roll media will be wound
up by the winding unit.
The winding unit rotates in
the reverse direction.
F. Reverse The roll media will be
unrolled back out of the
winding unit.
Forward Feeds media forward.
Backward Feeds media backward.
The feed unit rotates in the
reverse direction.
R. Reverse The roll media will be
unrolled back out of the
feed unit.
User's Guide – Osprey 75/102/130
103
Chapter 6: Printer menu
Remarks
This function is displayed when
"ON" is selected in the Winding
unit menu.
Refer to: "Winding unit menu"
This function is displayed when
the media is set.
This function is displayed when
the media is set.
This function is displayed when
the pressure roller is up.
AP-75102, Rev. 2.0, 28/11/2007