MUTOH Osprey 75 User Manual page 75

When "ALL" has been selected in the Step 5, Step 6 to 9 is repeated until the print head washing
Step 12 :
treatment is completed for all print heads.
•
When the print head washing treatment has been completed for all print heads, the operation panel
returns to the normal condition.
•
The following message is displayed on the operation panel
Notes
•
In the [****] part of the message, the colour of the print head to be washed will be displayed.
Follow the instructions in "Switching the power OFF" to power OFF.
Step 13 :
Set the 3-way valve cover removed in steps 1 and 2.
Step 14 :
The print head washing treatment has been completed.
Notes
•
If the power ON after the print head washing treatment is completed, the product starts the initial ink
filling.
User's Guide – Osprey 75/102/130
Chapter 4: Periodical maintenance
75 AP-75102, Rev. 2.0, 28/11/2007