(2) When "OFF" is selected in the media cut menu
Verify.
Step 1:
•
There is no printing operation being performed.
•
The control panel is in a normal status.
•
The control panel MEDIA SET lamp has to be unlit.
When altering the position where the roll media has to be cut, do so in the home position setup
Step 2:
menu in "Menu setup on the operation panel", and advance the roll media to the position that needs
to be cut.
Open the front cover.
Step 3:
Place a razor blade (3) on the media cut groove on the platen, and cut the roll media.
Step 4:
Close the front cover.
Step 5:
User's Guide – Osprey 75/102/130
111
Chapter 6: Printer menu
AP-75102, Rev. 2.0, 28/11/2007