MUTOH Osprey 75 User Manual page 39

Soak the cap sponges and the poly-knit wipers with jet-wash fluid using the wash bottle.
Step 4 :
Notes
•
Clean the following parts periodically.
The resin part of the print head cap.
o
The sides of the head (i.e. the parts to which ink clotting, etc., can easily adhere)
o
The cap sponges.
o
Set the print head cap on the waste fluid box.
Step 5 :
Notes
•
When setting the print head cap on the waste fluid box, prevent it from touching the nozzle surface of
the head.
Position the caps on the print head cap and the print heads in front of each other.
Step 6 :
Lift the print head cap and set the purge plate to fix it.
Step 7 :
Close the maintenance cover, ensure that the cover has been firmly fixed.
Step 8 :
No. Name
1 Print head cap
2 Cap sponge
3 Poly-knit wiper
4 Wash bottle
No. Name
1 Waste fluid box
2 Print head cap
3 Print head
4 Purge plate
39
User's Guide – Osprey 75/102/130
Chapter 3: Basics
AP-75102, Rev. 2.0, 28/11/2007