Panasonic KX-TVS100 Quick Installation Manual page 85

387 For department dialing, press [*].
388 Custom service menu.
389 The callback number is not assigned.
390 Message from the system manager.
391 State your comment at the tone.
392 Beeper access disabled.
393 To set call transfer status, press [1].
To set up covering extension, press [2].
To set message reception mode, press [3].
To set incomplete handling status, press [4].
394 Call blocking enabled.
395 Call screening enabled.
396 Intercom paging enabled.
397 Beeper access enabled.
398 All transfer services disabled.
399 To enable call blocking, press [1].
To enable call screening, press [2].
To enable intercom paging, press [3].
To enable beeper access, press [4].
To disable all transfer service, press [5].
400 Message reception mode is interview mode.
401 Message reception mode is message
recording mode.
402 To set leaving a message status, press [1].
To set covering extension transfer status,
press [2].
To set intercom paging status, press [3].
To set beeper access status, press [4].
To set operator transfer status, press [5].
To set returning to top menu Automated
Attendant service status, press [6].
403 Leaving a message is enabled.
404 Leaving a message is disabled.
405 Covering extension transfer enabled.
406 Covering extension transfer disabled.
407 Intercom paging disabled.
408 Operator transfer enabled.
409 Operator transfer disabled.
410 Returning to top menu Automated Attendant
service enabled.
411 Returning to top menu Automated Attendant
service disabled.
412 (Number) messages to verify.
413 One message to verify.
414 No messages to verify.
415 Message for (name).
416 Received on (date).
417 Message recorded on (date).
418 Has not been received.
419 Has been erased, because message retention
time expired.
420 To play the message, press [1].
To check the previous message, press [1]
twice.
To check the next message, press [2].
421 To cancel this message or verification, press
[3].
422 No more messages.
423 This is the last message.
424 To delete distribution verification of this
message, press [1].
To cancel message delivery, press [2].
425 Verification deleted.
426 Message delivery canceled.
427 The message is (message).
428 Sorry, this group is full.
429 Eight members maximum.
430 This list member already exists.
431 To add more members, press [1].
To end, press [2].
432 Telephone number is (telephone number).
433 To delete all group members, press [1].
434 This group has no members.
435 To delete, press [1].
436 To play the next, press [2].
437 Group member deleted.
438 Enter delivery list number [1] or [2].
439 Delivery list number is (number).
440 To add new member, press [1].
441 To delete members, press [2].
442 To review, press [3].
443 Sorry, this list is in use for delivery.
If this list is edified, all the deliveries will be
canceled.
6.85